Tutorial 14 calls on the reader to implement a two-function calculator on the FPGA. The design will continuously multiply or add 2 numbers then displays the results on a seven segment display board. The tutorial uses Xilinx ISE 10.1 and the Spartan-3E starter board.

This project was done with ISE 9.2 and ModelsimXE simulator

Click here for the Word file for the project

Click here to download the entire project as a .zip file.

This project was done with ISE 10.1 and the ISE simulator

Click here for the Word file for the project

Click here for the pdf file for the project

Click here for the open office file for the project

Click here to download the first .zip file.